Loss of neutral

Loss of neutral

Postby busybee » Sat Mar 14, 2015 1:21 am

:o moving the throttle knob on my EGT150 through the neutral gate had no affect on stopping the drive motor from operating in either forward or reverse, after removing the speed control assembly I discovered a mechanical problem; the split pin that holds the knob rod to the cam shaft had come half off, problem solved when split pin re-install and the ends on both sides flared a bit to prevent removal, no one hurt and nothing damaged but the potential way there. :lol:
Attachments
100_7110.JPG
100_7110.JPG (923.52 KiB) Viewed 555 times
busybee
 
Posts: 9
Joined: Wed Jan 16, 2013 1:34 am
Location: Innisfil,Ontario,Canada

Return to Stock Control System

Who is online

Users browsing this forum: No registered users and 1 guest

cron